SMATE SM1UHDSE49, Operation Manual

Page: 49 / 63

-48-
© SMATE
Instant Recording:
Important PVR Notes:
When using the USB/Media function, remember the following important points:

We strongly recommend you back up all data in the USB storage device to another
storage device so you do not risk losing any data in case of an unexpected device failure
or accident. We do not assume liability for any loss of data due to misuse or malfunction.
Data backup is your personal responsibility.

You cannot change to another channel or select another function while in recording mode.

If the signal is interrupted or removed while in recording mode, the recording will stop until
the signal is established. This may cause you to lose program content.

The file recorded can only be used in this TV. Do not copy it to any other device.

Please note Time Shift-Size and Always Timeshift have been disabled, as they are known
to cause issues with powering off USB’s as a way to protect them. Please set the program
schedule for longer to ensure recorded programs are recorded appropriately for the entire
duration and not affected by changes to program timings by the network broadcasters.
.

If you see the message ‘DISK NOT READY’ displayed, remove the device, reconnect it,
and proceed with your recording.

Some USB storage devices may not be compatible for smooth operation with this TV.

For large file sizes and large capacity storage devices, the loading speed may be longer.
The recognition speed of a USB storage device may vary depending on the device.

When connecting or disconnecting the USB storage device, ensure the TV is not in USB
mode, otherwise the USB device or the files stored in it may be damaged.

Only use a USB storage device formatted in a FAT32 file system provided with the
Windows operating system. If it is formatted by a different utility program that is not
supported by Windows, it may not be recognised.

Ensure any USB devices connected to the TV do not use/exceed 500mA power rating.

If an “Unsupported File” message is displayed, the file format or codec is unsupported or
corrupted.