SMATE SM1UHDSE49, Operation Manual

Page: 32 / 63

-31-
© SMATE
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the
volume every tim
e the channel is changed. “Auto Volume” automatically adjusts the volume of
the desired channel by lowering the sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Surround
It is used to turn on surround sound to gain better sound effect.
SPDIF Output
It is used to select
“SPDIF Mode”. This option can be used for all outputs sources.
Alone
It is used for only sound output and no image is displayed. Screen display is off.
Channel
Auto Tuning
By default search type will be DTV as Australia broadcasts free to air TV signal digitally.
NOTE : There are other DTV+ATV and ATV tuning options also available for other regions.
Press / key to select "Auto Tuning" option. You can select the country in this list view and set
the "Search Type" option. The number of searched channels will be shown on the screen.
When the search is finished, all the channels will be stored in the memory.
NOTE: If you want to exit the search, you can press EXIT button. Please ensure the right time
zone is selected from the Date & Time menu of the Smart Mode as it ascertains the right EPG
times for the DTV operation.
DTV Manual Tuning
In the
DTV source, you can choose “DTV Manual Tuning” to enter “DTV Manual Search”
menu. You can use the search button to choose the frequency. Press OK button to search,
and then the TV will store the DTV channel if there is a DTV signal present.
Bandwidth Switch
Please note: Default for Australia is 7