background image

11. Warranty

How Do You Get Service?

 

If something goes wrong with your Product during the warranty period, use the following procedure to return 
the Product to MADS Company.
1. Restore the STOCK software to your vehicle ECM.  DO NOT RETURN A VIN # LOCKED SMARTY.

2.

Download and fill out the Assistance Request Module available from MADS internet site or send an e-mail 
to MADS (e-mail information is available from MADS internet site)  Include the following:

Information from your sales receipt (electronic copy would be appreciated). The sales receipt must be 
from the location where you purchased your Product and must include the name of the business where 
you purchased the Product and the address of the business.

Serial number of the product

A brief written description of the problem

Your address and other personal information to contact you

3.

Contact MADS distributors for immediate assistance

12. Declaration of Conformity

For customers in North America

   

Model number:

Smarty S-06-SSR

Trade Name:

M.A.D.S.

Responsible Party:

M.A.D.S. Electronics s.r.l.

Address:

via Monte Cervino, 2
37057 San Giovanni Lupatoto (Verona) – ITALY

e-mail:

[email protected]

Tested to Comply With FCC Standards
FOR HOME OR OFFICE USE

The device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This   device   must   accept   any   interference   received,   including   interference   that   may   cause   undesired 

operation

For customers in Europe

  

“CE”   Mark   indicates   that   this   product   complies   with   the   European   requirements   for   safety,   health, 
environment and customer protection.

Page 16 of 16

Summary of Contents for SSR S06-SSR

















Reviews: