Smarty SSR S06-SSR, Instruction Manual

Page: 15 / 16

10. Appendix A: Error messages description
This section contains all the possible error messages shown by Smarty:
Error message Cause Solution
CAN ERROR # A problem in the CAN Bus
communication Check connection cable or contact
MADS if the problem persists
CCD ERROR # The communication with
ABS unit doesn’t work Check connection cable or check ABS
unit
COMM. TIME OUT The ECM of the vehicle
doesn’t answer to Smarty Turn the ignition key on (DO NOT
START ENGINE) or Check the
connection cable
ECM Changed The ECM unit of the vehicle
has been changed Restore the original ECM back to
STOCK before changing ECM
Empty Memory,
Please Update The last Update operation
(through USB port) has been
unsuccessfully completed.
Smarty memory has been
corrupted. Repeat the Update operation.
The data files are available on the
MADS internet site.
INTERNAL ERROR # Smarty internal malfunction Call MADS assistance
Memory Error A malfunction in the
Smarty’s memory Call MADS assistance
Memory Written
Wrong Data File The update file transmitted
to Smarty through USB port
is corrupted Download again the update file from
MADS internet site and update Smarty
with the correct file
PROGRAM ABORTED The ECM update function
has been interrupted Restore the ECM to STOCK with the
recovery procedure.
S/N Verify Error The serial number of your
vehicle has not been verified Check connection cable
SW Version doesn’t
Match S/N The ECM software version
doesn’t match with the serial
number Please contact MADS or the seller.
UNKNOWN SOFTWARE Your vehicle contains a
software version unknown to
Smarty
Please contact MADS or the seller.
VIN# Locked Smarty has been connected
to a different vehicle Restore the original vehicle back to
STOCK before connecting Smarty to a
new vehicle
WRONG CAN BUS The connection between
Smarty and the ECM is not
correct Please contact MADS or the seller.
WRONG COMMUNIC. The communication between
Smarty and the ECM unit is
disturbed Check the connection cable or the
battery charge level
WRONG VIN# The serial number of your
vehicle is not valid Wait 30 seconds with the ignition key
on and try again
Page 15 of 16