After a few seconds, a numeric counter with the percentage of the transmitted software will appear.
At the end of the transmission (when 100% is reached), Smarty will update the functional parameters
of the ECM. The following screen will appear:
During the updating session, Smarty can ask to Turn key OFF and Turn Key ON. Please follow these
instruction. DO NOT DISCONNECT Smarty before the updating session is completed.
At the end of the recovery operation, the following screen appears:
After a few seconds Smarty displays the following message:
Please, unplug Smarty from the diagnostic port and turn the ignition key off for 15 seconds.
The job is done. The ECM has been returned to the STOCK software and Smarty is no longer VIN#
Locked. You’re ready to start from the beginning again.
5. Power on Demand
This function allows the user to select the preferred power level instantly, also during the driving!
At the PoD menu:
press '1' key to enter the Power on Demand function, the Power page will appear:
Power can be selected between 99 (full power) and 0 (lower power). Just type the preferred power.
The number will appear in the second line of the display, after a while it appears on the first line, this
confirms that the value has been correctly sent to the truck. You have just to release the throttle to
apply the new power.
Smarty waits for a new Power on Demand adjustment. To return to the PoD menu, press '<'.
6. Reading Key-on counter
Smarty leaves no footprint, all the trip data stored inside the ECM remains unchanged. As an
example you can verify that the Key-on counter remains stored.
From the main menu, press the ‘2’ key to select the data read function.
From the data read menu, press the ‘1’ key to select this function.
Smarty will try to establish a communication with the ECM.
Page 11 of 16
