SmartStore SM1507, Assembly Instructions Manual

Page: 8 / 16

fig.3
ASSEMBLE DOOR
7
SELECT:
1 x 1.900 m Door Sheet
2 x 0.545 m Door Top/Bottom Flashings
2 x 1.900 m Door Side Flashings
2 x 0.915 m Door Braces
1 x Padbolt Support Flashing
2 x Hinges
50 x Rivets
STEP 1:
•
Lay out 1 x 1.900m Door Sheet on a flat
surface.
STEP 2:
•
Position door side flashings and top
and bottom flashings and assemble
door as shown, ensuring narrow
face of flashing is on the front as
per fig.1
STEP 4:
•
On the back of the door, place door braces in posi-
tion as shown in fig.4.
•
Ensure that the top and bottom ends of the braces
are under the door flashings as shown in fig.5 and
opposite ends of the braces overlap in the middle.
•
Rivet door brace flashings onto back of door as
shown. Where possible, rivet from front of door .
STEP 3:
•
Attach hinges to door side flashing using
rivets provided. Ensure hinge is flush
with back of door, and 60mm in from
each end as per fig.2.
•
Using six rivets, attach padbolt support
as shown in fig.3.
fig.4
fig.5
fig.2
Hinges
fig.1