iSmartATF 501 Auto Transmission Cleaner and Fluid Exchanger User’s Manual
7
Operations
Note:
During the unit is in operation, it will produce the vibration with a certain frequency and noise. This is the normal
performance. Do not take it as the malfunction.
1. Preparation
1.1 Jack vehicle
Jack the vehicle to keep the drive wheel off the ground at least 200mm, apply the parking brake and block the driven
wheels in front and behind.
1.2 Connecting hose
1)
Locate the fluid hose that is connected between the radiator and transmission at the most convenient location and then
disconnect the adaptor. Locate the matched connector inside the connector box and connect it to the disconnected
adapter.
2)
Connect the two hoses marked “TO TRANSMISSION” of iSmartATF 501 to the disconnected two ends of the hoses of
automatic transmission (no necessary to consider the direction of the fluid flow). Refer to Fig.7.
1.3 Power cables connection
Connect the power cables of the main unit to the designed power supply.
1.4 Check-up
1) Start the engine, and ensure that there is no leakage in pipeline.
2) Confirm that the power supply of the iSmartATF 501 is normal, and then switch on the unit.
Fig.8