iSmartEV P01 User Manual
29
diagnostic scan (if no comparison is required, you can
select "Diagnostic Scan"). The device has the report
comparison function, so you need to select a correct report
type when saving reports. By comparison, maintenance
technicians can clearly understand whether the fault codes
found before diagnosis have been completely cleared after
maintenance.
Enter the name of tester and customer, and then click [OK]
to enter the report details view page.
On the report details page, click [Save] to save the report.
All test reports are stored in the "Main Interface" -> "Test
Report" tab.
【
Help
】
Click to view the cause analysis of the fault code.
【
Code
clearing
】
Click to clear all the fault codes.
Note: For general models, please strictly follow the
conventional sequence: read the fault code first, then clear
the fault code, test run, read the fault code again for
verification, repair the vehicle, clear the fault code, test run
again to confirm that the fault code does not appear.
7.2.2 System selection
Users can use this function to manually select the vehicle electronic control
system for testing.
On the screen for selecting test options, click "Select System" to enter the
following page:
Select the electronic control system to be tested. The function selection page is
Summary of Contents for iSmartEV P01
Page 8: ......
