7
PE24 Manual Version 1.0
2)The light on the alarm will flash GREEN
once approximately every 10 seconds
indicating the alarm is armed.
3)Ensure the Remote Receiver is within 100
linear feet (30 M) of the pool alarm and is
positioned where it can be heard from
anywhere in the house. Ensure the 9V
battery is installed correctly and plug in the
AC adaptor as a battery back-up as shown
in Figure 9.
NOTE: The RED LED will light and the siren will
beep twice when the remote is activated.
DEACTIVATING THE ALARM
1)When the alarm sounds, the light will turn
RED and the siren will sound. Touch the
Magnetic Key against the icon on the top
casing to silence the alarm as shown in
Figure 8.
2)After the water settles, follow the
instructions for Activating the Alarm.
REMOVING THE ALARM
1)Place the Magnetic Key against the icon on
the casing of the alarm and lift the alarm
out of the pool.
2)Place the alarm on the Alarm Stand. DO
NOT lay the alarm on its side as shown in
Figure 10.
IMPORTANT: Removing the alarm should only be
done by the individual responsible for safety of
the pool. Removing the alarm should only be
done for maintenance, such as battery
replacement, swimming and winterization. When
the pool is not in use the alarm should be
activated and returned back to the pool.
Figure 9
Figure 10
