2
SmartPlug is a universal, Z-Wave™ Plus compatible and relay switch in the form of a socket adapter.
The device may be used to operate any device up to 3000w power output. The device features
voltage, current, active power and power consumption measuring.
This product can be included and operated in any Z-Wave™ network with other Z-Wave™ certified
devices from other manufacturers and/or other applications. All non-battery operated nodes within
the network will act as repeaters regardless of vendor to increase reliability of the network.
This device must be used in conjunction with a Security Enabled Z-Wave Controller in order to fully
utilize all implemented functions
Z-Wave™ Network Inclusion/Exclusion/Reset
There is one button on the side of the device, it can be executed inclusion, exclusion and reset from
Z-Wave™ network.
Add¹
1
、
Power up the device.
2
、
Set Z-Wave™ Controller into inclusion mode
3
、
Press and hold the button for 5s until Blue
led lights is on, then release the button
before led turn off.
Blue led will blink with 1s
interval until inclusion
successful.
Remove
1
、
Power up the device.
2
、
Set Z-Wave™ Controller into exclusion mode
3
、
Press and hold the button for 5s until Blue
led lights is on, then release the button
before led turn off.
Blue led will blink with
0.5s
interval
until
exclusion successful.
Factory Reset²
1
、
Power up the device.
2
、
Press and hold the button for 10s until leds
light on, then release the button before led
turn off.
Product Test Mode
1
、
Press and hold the button.
2
、
Power on the device, device will enter
factory product test mode with Blue light
flash.
Send NIF³
Press and hold the button for 5s until Blue
led lights is on, then release the button
before led turn off.
Notice 1:
When device enters into inclusion mode, the device all functionality will be useless. The
inclusion mode will be timeout after 30s, user can implement step 3 to terminate inclusion mode.
Notice 2:
Factory Reset will clear the device all Z-Wave™ Network data (include home id, node id,
etc…) saved in memory, and restore all configuration parameters to factory default. Please use this
procedure only when the network primary controller is missing or otherwise inoperable.
Notice 3:
NIF – Node Information Frame
