Smartgen HEM8500, User Manual

Page: 9 / 45

HEM8500 Engine CAN Monitoring Controller User Manual Page 9 of 45
4 OPERATION
4.1 KEY FUNCTION DESCRIPTION
Table 4 Key Function Description
Icons Keys Description
Stop
Stop the running engine;
Reset shutdown alarms when engine alarms occur.
Start Start engine in standby status.
Power
In standby status, press longer to turn off the power;
In power off status, press longer to turn on the power.
Engine
Diagnosis
It can put the controller in diagnostic mode, and its indicator lights
up; Press it again and it exits diagnostic mode, and its indicator
lights off.
Paging Up
In Diagnostic mode, if multiple ECU alarms occur, it can check the
flashing status of the last alarm.
Paging Down
In Diagnostic mode, if multiple ECU alarms occur, it can check the
flashing status of the next alarm.
Manual Throttle
After the engine starts, it can put the engine in manual throttle
mode, its indicator lights up, and speed can be adjusted by throttle
knob. Press it again and engine exits manual throttle mode, its
indicator lights off, and speed cannot be adjusted at this moment.
Subtotal Zero
Press it for 3s and “subtotal time”, “subtotal fuel consumption” and
“subtotal avg. fuel consumption” become “0”.
Home/Set
In main menu page, it can enter parameter setting interface; in other
pages, it can make it faster to return the main menu page.
Up/Increase
1) Screen scroll;
2) Move up cursor and increase value in setting menu.
Down/Decrease
1) Screen scroll;
2) Move down cursor and decrease value in setting menu.
Throttle
In manual throttle mode, forward/backward rotate this knob to
increase/decrease target speed;
Press the knob and it can return to “Idle Speed”.
E-Stop
Press it, start output and ECU power will be disconnected and
meanwhile stop process will be executed.