Smartgen HEM8500, User Manual

Page: 14 / 45

HEM8500 Engine CAN Monitoring Controller User Manual Page 14 of 45
5.2 USER MENU AND PARARMETER SETTINGS
Press key and enter user menu:

Parameter
After entering the correct password (factory default password is 00318) you can enter parameter
settings interface.
 Module settings

Timer settings
 Engine settings

Sensor settings (flexible sensor 1~2, fuel level sensor setting, flexible sensor 3~4 (current type
sensor) settings;)

Input port settings
 Output port settings

4~20mA output settings
Table 7 Parameter Setting Example (Screen 1)
>Return
>Module
>Timers
>Engine
>Sensor
>Inputs
>Outputs
>4~20mA Output Screen 1:
Use to change settings and to enter settings
(Screen 2).
>Return
>Pre-heat Delay
>Cranking Time
>Crank Rest Time
>Safety On Time
>Cooling Time
>ETS Solenoid Hold
>Fail to Stop Delay
>Power Off Delay