integrated WLAN modules.
Units with internal PS:
Connect the AC Cable to the AC input connector on the
back of the unit.
Units with external PS:
Connect the AC Cable to the AC input connector on the
powers supply and connect the DC side of the power supply to DC input of the unit.
Only for SmartClient on a (USB) “stick”:
Insert the USB Stick into a USB port on your Linux compatible PC and adjust your
BIOS setting to boot from USB (HDD mode preferred).
System Start and Configuration
Press the ON button on the monitor.
To boot the unit press the <On/Off> button on the front panel of the unit. The unit
will boot and present the user interface. The boot process of a correctly set up and
working unit will take about 40 - 90 sec, depending on the SmartClient model.
To enter the unit's SETUP, boot the unit and wait for the desktop to appear. There are
two setup options, basic HW setup via SFT menu options and Thin Client setup
options via the SmartClient setup and configuration window.
SmartClient Desktop
(actual backgrd. / icon images may differ)
The user interface consists of the actual desktop accompanied by a task bar and the
“SmartClient Setup and Configuration” Window.
Copyright © SmartFLeX Technology, Inc., SmartClient Manual, Rev. 02/22/16
Page: 5 of 19
