Smarter tools Power-300G, Operating Manual

Page: 9 / 24

6
VIII. LENS & HELMET MAINTENANCE
• DO NOT! use corrosive solvent on the filter screen or any of the
helmets components
• DO NOT! immerse the filter lens in water or any other liquid
•
If helmet is not in use, please keep it in a dry place.
• Clean the filter lens with a clear lint-free tissue or cotton cloth
•
You should inspect this helmet frequently and immediately replace worn or
damaged parts.
Replace the Front Lens Cover if it is damaged (cracked, scratched, soiled or
pitted).
1. To Replace the Cover:
A. Lift up on the tab at the bottom of the outer frame to unsnap the
frame and access the lens cover. Pull out the lens cover.
B. Remove the protection film from both sides of the new Lens if it
comes with a film covering.
C. Place the new lens into place and snap the frame securely to hold
the lens in place.
2. Clean the filter lens with a clean lint free tissue or cotton cloth.
3. Do not immerse the lens in water or any other liquid. Do not use
abrasives, solvents or oil based cleaners.
4. Storage temperature -4° F to 158° F.
IX. Parts List and Diagram
Part#
Description
Part#
Description
1 Helmet body 6
Rubber Gasket
2 Headgear Height Adjusting Pin 7
Black Glass
3 Headgear Diameter Adjusting Knob 8
Inside Lens Cover
4
Headgear Angle Adjusting Knob
9
Cartridge Frame
5
Outside Cover Lens