OSD MENU SETTING
I. ALARM SET
4 Alarm inputs are available and each alarm is activating to presets, group tours or
patterns.
I-1. ALARM SET - ALARM NO.
Up to 4 alarms are selectable by using joystick right or pressing the pan right key when
the cursor is on ALARM NO.
I-2. ALARM SET - ALARM INPUT
Alarm inputs can be programmed as NC (Normally Close) or NO (Normally Open)
The default setting is OFF
I-3. ALARM SET - ALARM ACT
Active alarms can trigger modes such as presets, Group tours 1-8, and Patterns 1-8.
Use the joystick or pan keys to select any preset number, group tour no. or pattern no.
I-4. ALARM SET - SAVE
After setting up the alarm features, to save the data move the joystick right or press
the pan right key when the cursor is on SAVE. After saving the data, the cursor moves
to Alarm NO.2 automatically to prepare for the next alarm.
I-5. ALARM SET - EXIT
To escape this page, move the joystick right or press the pan right key.
*
Before activating Alarms, you must set ALARM ENABLE at DOME SET ALARM
ENABLE
(Refer to page 23)
ALARM SET
ALARM NO : 01
ALARM INPUT : OFF
ALARM ACT : 001
SAVE
EXIT
DEFAULT SETTING
Summary of Contents for STC-3902
Page 42: ...DIMENSIONS UNITS mm...
