OSD MENU SETTING
G. PRIVACY SET
24 Privacy masking zones can be set.
G-1. PRIVACY SET - PRIVACY NO.
Up to 4 privacy masking zones can be set.
G-2. PRIVACY SET - DISPLAY
Move the joystick right or left or press pan right/left to set ON in order to show the
selectable block in the center of the monitor. This block appears as a translucent
square with blue colour when set ON. The default setting is OFF.
G-3. PRIVACY SET - ACTION (MOVE / ADJUST)
To set the blocking area, press FOCUS FAR button when MOVE MODE is displayed.
Then use the joystick or pan keys to the user defined area in order to set the blocking
area. Then press FOCUS FAR button again to escape from MOVE MODE.
To adjust the size of the blocking area, move the joystick or use the pan keys when
the cursor is on ACTION. After it has changed to ADJUST MODE, press FOCUS FAR
button in order to adjust the size of the blocking area. The size of the blocking area can
be adjusted by using joystick up/down or left right ? or the pan and tilt keys.
After adjusting the size of the blocking area, press FOCUS FAR button to escape the
ADJUST mode.
* ADJUST: You can change the masking size by using the joystick or pan keys
* MOVE: You can move the masking area by using the joystick or pan keys (Default)
G-4. PRIVACY SET - SAVE
After setting the privacy masking zone, to save the data, move the joystick right or pan
right key when the cursor is on SAVE. After saving the data, the cursor moves to
PRIVACY NO.2 automatically to prepare for the next privacy masking zone.
G-5. PRIVACY SET - EXIT
To escape this page, move the joystick right.
PRIVACY SET
PRIVACY NO : 01
DISPLAY
: OFF
ACTION
: MOVE
SAVE
EXIT
DEFAULT SETTING
Summary of Contents for STC-3902
Page 42: ...DIMENSIONS UNITS mm...
