Follow these steps to program the Home position:
1. Press
MENU
to display the main menu on the monitor.
2. Select Home Function by pushing the
Joystick
to the right or to the left to scroll through the
None, Tour, Pattern, Auto Scan and Preset functions.
3. Select Function Number by pushing the
Joystick
down, and push the
Joystick
to the right
or to the left. The executable function number will scroll. Each function has maximum
numbers. For example, you can have 240 Presets, 8 Tours, 4 Patterns and 8 Auto Scan
options.
4. Select Function Time by pushing the
Joystick
down. Push the
Joystick
to the right or to
the left to select from 10 to 240 seconds.
5. Select Function Enable by pushing the
Joystick
down. Turn the Home Enable ON or OFF
by pushing the
Joystick
to the right or to the left.
• OSD DISPLAY
CAMERA TITLE
: 8 CHARACTER CAN BE SET
VIEW DIRECTION
: ON / OFF
DOME OSD DISPLAY
: ON / OFF
AREA DISPLAY
: ON / OFF
• VIEW DIRECTION
“ON” sets current direction as N(north) and the coordinate angle to 000. “OFF” hides the
directional title. Every 90 degrees of clockwise rotation will change the title to E(East), S(South),
W(West). If using the ON/OFF option frequently, it is recommended that you set “North” as a
Preset. Recall the “North” Preset before enabling the directional title.
• DOME OSD DISPLAY
All display or title will disappear when DOME OSD DISPLAY sets OFF
• AREA DISPLAY
If this option is enabled, the nearest area title will be displayed when the camera is moving
whether by manual operation, Auto Scan, or Pattern. Select ON or OFF by pushing the
Joystick
to the right or to the left. The Dome camera’s OSD will override this function (Dome camera’s
OSD must be enabled).
DISPLAY SETUP
CAMERA TITLE : DOMEID
VIEW DIRECTION : OFF
DOME OSD DISPLAY : ON
AREA DISPLAY : OFF
SAVE AND EXIT(ESC TO CANCEL)
