1. Press the
SCAN
key to enter Auto Scan menu directly. Or press the
MENU
key to display the
main menu on the monitor. Scroll to Auto Scan and push the
Joystick
to the right.
2. Select an Auto Scan number by pushing the
Joystick
left or right.
3. Twist the
Joystick
to enter the title by scrolling through the alphanumeric characters and
pushing the handle to the right or left to move to the next space. Press
ENTR
key or push the
Joystick
down to finish title mode.
4. Push the
Joystick
downward to select “Speed” and set the speed by twisting the
Joystick
clockwise or counterclockwise (STT-2404CZP) to select the auto scan speed.
5. When finish entering the title, select “START ANGLE” with the
Joystick
. Hold down the
CTRL/PGM
key while selecting the start position and the zoom using the
Joystick
. Current
position will be displayed. Release
CTRL/PGM
key to complete the selection of the start
position.
6. Push the
Joystick
downward to select “END ANGLE.” Hold down the
CTRL/PGM
key while
moving the Joystick to select the end position and the zoom. The end position angle should
be larger than start position. Release the
CTRL/PGM
key to complete the selection of the end
position.
7. Select Save and Exit by pushing the
Joystick
to the right. Press
ESC
to exit the program
without saving.
NOTE: Using the Tour mode in conjunction with preset and Auto Scan, you can make the camera
travel from one preset position to another preset position at a specific speed. (Pan only)
a. Before entering the Auto Scan menu, select a preset position as a starting point for Auto Scan.
Example
:
2
+
PRST
and do step 1 to 4. Instead of step 5, just press the
Ctrl/PGM
key at the
start angle position, the current position will be displayed as a start position.
b. Save and exit from the menu.
c. In normal mode, call a preset to be the end point of scan. Press
3
+
PRST
then press
Scan
key to enter the Auto Scan menu. Move the cursor position to END ANGLE. Just press
CTRL/PGM
key at the end angle position. Do steps 7.
Example
:
Preset 001>002>003>004>005>006, Auto Scan 01 starts at 002, ends at 003,
Auto Scan 02 starts at 005, ends at 006. If you set Tour 01: 001, 002, A01, 004, A02.
1
è
2 2~3
è
4
è
5~6
è
1
è
2 2~3 ……
Where
è
: Quick move, ~ : Programmed speed by Auto Scan.
Also you can execute Endless Auto Scan which is to turn one direction continuously by Pressing
9
+
SCAN.
3.5 Preset
(Second Item of the Main menu / Shortcut:
PRST
)
