3
SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.1.1
2. HPSC-Series
2.1. Mechanical and Electrical Specifications
Specification
HPSC1
HPSC4
Output channels
1
4
Asynchronous Operation
-
Full timing independent channels
Operating Modes
Continuous, External Trigger, Internal Trigger,
Software Trigger, External Switch
Max. Voltage
48V (pulsed/continuous)
Max. current pulse
(depends on pulse width)
40A @ 48V
40A @ 48V (per channel)
160A @ 48V (in total)
Current Resolution
down to 1mA
Max. continuous current
4A @ 24V
(without heat sink, max. 25°C ambient)
5A @ 24V
(with heat sink)
4A @ 24V
(per channel)
5A @ 24V
(all channels in total)
Pulse output range
1µs to 1000ms, 1µs resolution
1µs to 60s, 1µs resolution
Maximum frequency
(External Trigger)
4.9kHz
50kHz
Maximum frequency
(Internal Trigger Generator,
External Switch Mode)
997Hz
25kHz
Trigger input
Opto-isolated, HIGH at 3V to 24V; positive or negative edge
Trigger output
Open-collector, max. 30V / 50mA
Open-collector, max. 30V / 50mA
(opto-isolated)
Control
Ethernet (10Base-T), RS-232 or
USB1.x/2.0
Ethernet (10Base-T/100Base-TX),
RS-232 or USB1.x/2.0
Input Power requirements
12V – 24V DC (min 11V, max 26V) at max. 6,5A
Power consumption
Max. 150W (depending on load)
Housing
Black anodized aluminum case
External dimensions
(H / W / L)
39 x 88 x 103 [mm]
45 x 130 x142 [mm]
Weight (approx.)
270g
635g
Storage temperature
(ambient)
From -30°C/-22°F up to +80°C/+176°F
Operating temperature
(ambient)
From -5°C/+23°F up to +50°C/+122°F
Relative humidity
From 25% up to 80% (non-condensing)
Conformity
CE, RoHS2
Table 1: HPSC1 and HPSC4 - Mechanical and electrical specifications
