1
SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.1.1
1. Overview
1.1. Description
Strobe controllers are used for strobing LED illuminations in machine vision applications. Very
high power pulses are aligned to external trigger with high accuracy. Precise current overdrive
and very small camera image exposition are used for acquisition of high-speed motion objects.
User adjustable output voltage provides high efficiency and low power consumption.
The IPSC and HPSC strobe controller provides repeatable intensity control of LED lighting, it
includes the power supply, intensity control, timing and triggering functions required for machine
vision systems. LED lighting needs a constant current supply as small variations in voltage can
cause large variations in light output.
1.2. Precautions
To maintain optimal working temperature mount the device on a metal surface.
Thermal generation depends on the output parameters used by the controller.
Do not attempt to disassemble this device, there are sensitive parts inside.
Tampering with it could lead to permanent damage. Further, the devices can
develop high voltages and loads, which can be a serious risk to health.
Do not expose this device to rain or moisture. This device is not intended to work
under wet conditions.
Handle this device with the maximum care. Do not throw it, there are fragile parts
inside.
Operate this devices only with the type of power source that meets the
specifications indicated on the Strobe Controller and within the documentation.
Operating it outside of the specifications can cause to permanent damage. Further
electrical specifications can be found in the individual
Mechanical and Electrical
specifications
for each model.
LED illumination should never be connected or disconnected to the strobe controller
when the power output is enabled. Always turn the device off when changing LED
illumination.
