Page 56 of 64
Each time you connect a new display to the SignagePro
Client you will need to add or edit the screen settings.
•
Select either ‘Edit Screen’, ‘Add new screen’, or
‘Remove screen’ from the Screen Configuration
Menu.
•
Select ‘OK’ and hit ‘Enter’
•
‘Select Screen Rotation’ gives you the following
options; (figure 4.6)
o
Normal – Do not rotate
o
CW – Rotate screen clockwise
o
Invert – Flip screen upside down
o
CCW – Rotate screen counter clockwise
•
Select ‘Next’ and hit ‘Enter’
•
Screen Depth – Configures the default ‘color quality’
or color ‘depth’ for your display.
o
Select the desired ‘Screen Depth’ and hit ‘Next’
•
Screen Modes – Configures the video mode for your
display.
o
Use the up/down keys to scroll for the desired
resolution.
o
Use the space bar to check the desired
resolution.
o
Select ‘Finish’ and hit ‘Enter’ to save your
settings and return to the main menu of the
Configuration Panel.
o
Select ‘Ok’ on the confirmation window and hit
‘Enter’
d.
Write Xorg.conf and quit
Saves all of your changes by writing your configuration
settings to the Xorg Configuration file and quits the
configuration panel.
•
Select ‘OK’ and hit ‘Enter’ to save your settings.
e.
Quit
•
Quit the configuration panel without saving your
settings.
4.
Once you save your setting you will be prompted to test your
configuration. We recommend that you test your settings to
ensure best results.
Summary of Contents for SIGNAGEPRO
