Page 15 of 64
5.
Adding your company logo
One of the major functions of digital signage is to get your message
out and to increase your brand recognition. One of the most important
aspects of your brand is your logo. Combining your logo with
informative content is one of the best ways to do this.
Each logo on the SignagePro server consists of two files; an image file
and a text file. The text file describes the placement of the logo and
adds a time and date.
To enable your logo please do the following;
1.
If you haven’t done so already, create an image file of your
company logo. SignagePro support the following image formats;
.png, .jpg and .gif.
2.
Create a text file using notepad (or comparable text editor) and
insert the fields from tables 5.2 and 5.3.
See table 5.1 for format examples.
3.
Save the file using the file name you used for your logo and
.slogo as the extension.
Example= logoname.slogo
4.
Copy the image file and the .slogo file onto your USB flash drive.
5.
Insert the USB flash drive containing your logo image file and
the .slogo file into the SignagePro client.
6.
Run the configuration tool by pressing ALT+CTRL+2.
7.
Select the ‘Logo” tab.
8.
Select logo in dialog box and click ‘Ok’
9.
You can install more logos from USB flash disk pressing "Install
from USB" button".
Summary of Contents for SIGNAGEPRO
