INSTALLATION & OPERATION
7
This shunt determines the power-up
setting for EX mode. With the shunt
in the OFF position, the MOD 7 will
power up with EX mode turned OFF.
(Factory setting)
This shunt determines whether the
RIGHT REAR output is used for a
rear surround (CS) channel
(Fac-
tory setting) or an overhead (OS)
channel.
EX and Overhead Surround Jumper Settings
Right Rear Corner of Main Board
EX Power Up and Overhead Channel Configuration
The MOD 7 can be configured so that EX mode is either ON or OFF at power up. If you are not using the EX format,
then place this shunt in the OFF position.
The MOD 7 can be configured to deliver an overhead channel from digital soundtracks. If you are using a digital
player and have installed overhead speakers and amplifiers, then place this shunt in the OS position. Otherwise, leave
it in the CS position.
I
nstall 4 shunts for noise reduction.
(Factory setting)
Remove shunts for audio from video
source (DVD, LaserDisc, VCR).
NR Jumper Settings
Left of Matrix Board
Noise Reduction Configuration
The MOD 7 can be configured to disable the Noise Reduction
circuitry. This is desirable if you are using the Projector 2 input for
an audio from video source (DVD, LaserDisk, VCR) since these
sources are NOT NR encoded.
The factory setting enables the Noise Reduction circuitry.
