
X
Lower the vehicle all the way.
X
Remove the jack.
X
Tighten the wheel bolts evenly in a
crosswise pattern in sequence indica-
ted
:
to
?
. The tightening torque must
be 105 Nm.
X
Check the recommended tyre pressure
and adjust if necessary.
After travelling approx. 500 km, check the
tightening torque and retighten if neces-
sary.
i
Vehicles with tyre pressure control sys-
tem: all fitted wheels must be equipped
with functioning sensors.
Vehicles with steel wheels and hub caps:
X
Fit hub cap
A
such that valve
B
does
not become trapped.
X
Press the hub cap evenly onto the wheel
with both hands until you hear the hub
cap engage.
X
Check to make sure the hub cap is seated
securely on the wheel.
Vehicle with steel wheels and wheel hub
covers:
X
Fit the hub cap cover.
Storing wheels
X
Store wheels in a cool, dry and dark place
when not in use.
X
Protect against oil and grease.
Using the tyre pressure monitor
Useful information
It is the driver's responsibility to set the
tyre pressure to the recommended cold tyre
pressure suitable for the operating situa-
tion.
The tyre pressure monitor issues a warning
when the pressure drops in one or more of
the tyres.
The tyre pressure monitor works properly
only if sensors are present in all four tyres,
and after the monitor has learned the cor-
rect tyre pressure for the current operating
situation. This occurs automatically in
most situations, but may also be specified
after restarting the tyre pressure monitor.
Before restarting, check the tyres for the
recommended tyre pressure.
The tyre pressure monitor does not provide
a warning in the following cases:
R
even loss of pressure on multiple tyres
R
sudden loss of tyre pressure, e.g. due to
penetration by a foreign body
R
incorrectly set tyre pressure
The tyre pressure monitor has a yellow
warning lamp in the instrument cluster for
indicating a pressure loss or malfunction.
Restarting the tyre pressure monitor
(on-board computer with a mono-
chrome display)
X
Set the tyre pressure of all tyres to the
recommended value.
X
On the multifunction lever, press the
´
button repeatedly until the
°
and
h
symbols are displayed in the
instrument cluster display.
X
Press and hold the
a
button on the
multifunction lever.
The
°
and
h
symbols flash in the
instrument cluster display for approx-
166
Using the tyre pressure monitor
>> Maintenance and care
.