
Calling up MirrorLink
®
apps
X
Tap
0
on the home page of the smart
Media-System.
MirrorLink
®
starts in the smart Media-
System display.
X
Select the desired app.
The display switches to full screen mode.
X
To leave full screen display:
press and
hold the
ò
button on the smart Media-
System until the lower bar is shown.
X
To leave the display:
select
2
.
MirrorLink
®
audio playback
If your mobile phone supports this func-
tion, you can control audio playback via the
buttons on the smart Media-System.
X
To select the previous track:
press the
9
button.
X
To rewind:
press and hold the
9
but-
ton.
X
To select the next track:
press the
:
button.
X
To fast forward:
press and hold the
:
button.
X
To mute:
press the
8
button.
Terminating a MirrorLink
®
connection
X
Select
W
>
Disconnect
.
Using Android Auto™
Useful information
Android Auto™ is an application for the
connection between the smart Media-Sys-
tem and a mobile phone. Certain mobile
phone functions and apps can be controlled
via the smart Media-System with Android
Auto™.
Functions such as telephony, navigation
and the audio playback of Android Auto™
are displayed on the home page of the
smart Media-System.
Android Auto™ is available for mobile
phones with the Android™ operating sys-
tem.
Further information:
http://
www.smart.com/connect
.
In order to use Android Auto™, the follow-
ing conditions must be met:
R
the mobile phone supports Android
Auto™ starting from Android™ 5.0
R
the mobile phone is switched on
R
the mobile phone has an Internet con-
nection
R
the Android Auto™ app is installed on the
mobile phone
R
data sharing must be approved
Transmitted vehicle data when using
Android Auto™
When using Android Auto™, specific vehicle
data is transmitted to the mobile phone.
This makes it possible to use selected
mobile phone services efficiently. The
mobile phone does not have active access to
vehicle data. The following system infor-
mation is transmitted:
R
smart Media-System software status
R
system ID (anonymous)
This data is transmitted in order to opti-
mise communication between the vehicle
and mobile phone.
A random vehicle code is generated for this
purpose and in order to assign multiple
vehicles to the mobile phone. This code is
not related to the vehicle identification
number (VIN) and is deleted if the smart
Media-System is reset. The following driv-
ing status data is transmitted:
R
gear position engaged
R
instrument cluster day/night mode
This data is transmitted in order to adapt
the content displayed to the driving situa-
tion.
GPS data such as coordinates, speed and
compass direction is transmitted. This data
is transmitted only when navigation is
active in order to improve navigation (e.g.
when driving through a tunnel).
Using a mobile phone
133
>> Using the smart Media-System
.
Z