SMART Board MX V2 Series, User Manual

Page: 20 / 48

CHAPTER 2
USING BASIC FEATURES
12 smarttech.com/kb/171554
The image and table below list the functions available for the remote control.
No. Name Procedure
1 Power
l
Press to enter or exit Standby mode (see Waking up the
display and putting it back to sleep on page 9).
NOTE
Touch is not available right after waking up the display or
turning it on. Wait a few seconds and then the display will
respond to touch.
l
Press and hold for four seconds to turn off the display.
l
Press and hold for 10 seconds to reset the display.
2 Home Open the iQ Home screen (see Opening and using the Home
screen on page 10).
3 Up and down
buttons Select a menu option in the settings.
4 Set Open a selected menu option in the settings.
5 Left and right
buttons Change the value of the selected setting.