SMART Board User’s Guide
37
3 To change sound and video quality:
In the Recording Quality tab, select the sound quality from the
Sound Quality
drop-
down list. You’ll need to find a balance between sound quality and the limitations of
your computer system. Although higher sound quality produces better audio playback,
it also results in larger files and puts more demand on your computer system.
Use the default
Automatic Selection (Recommended)
setting for
Video Quality
before you try other choices. When this setting is selected, the program automatically
evaluates your system limitations and selects the best capture rate for your computer
system.
4 To change video format:
Press the Video Format tab and then select a video format:
•
Use
the
Microsoft Video (*.avi)
format to create a file that can be viewed with any
version of Windows Media Player. This format uses 256 colors.
•
Use
the
SMART Recorder Video (*.avi)
format to create a more compressed file.
This format uses 16 million colors. Because it has more colors, this format produces
videos that look better when played back than those produced by the Microsoft Video
format. The SMART Recorder Video format can be viewed in Windows Media Player
by people who have SMART Board software, or it can be converted using the pack
and show feature to enable those who do not have SMART Board software to view
the video.
5 To change target file paths:
Press the Target Files tab.
To change the file path under which videos will be saved, press the Browse button
next to the
Default Save Directory
and select the directory and file folder you want.
We recommend that you use a local hard drive because network drives are slower and
may hurt performance.
To change the file path under which temporary video processing files will be stored,
press the Browse button next to the
Temporary Files Directory
and select the
directory and folder you want. We recommend that you store temporary files in the
same drive as the saved video files because this dramatically reduces the amount of
time needed to save a recording.
To change free disk-space warnings, type file size limits in the text boxes provided for
the warnings that appear at the beginning of a new session and during the recording.
You can also de-select the
Warn me if free disk space is below
check box if you do
not want to receive low disk-space warnings at the beginning of recording sessions.
NOTE
: If you change your mind and want to return to the system default settings, press
the Restore Defaults button.
6
Press OK.
Creating and Playing Video Files
To improve the quality of your videos, follow these tips while recording:
1
Use your SMART Board interactive whiteboard. Electronic ink shows up very well in
the screen videos produced by SMART Recorder and it gives people something to
watch. Write often on the board to keep the attention of your audience.
2
Repeat questions from the floor. Just because you heard a question doesn’t mean the
microphone was close enough to clearly record what was said.
3
Don’t use animations. Animations and other special effects dramatically increase file
size.
Tip
To convert either AVI
file format to WMV
format for streaming,
download a conversion
application from
Microsoft at www.
microsoft.com/windows/
windowsmedia/wm7/
encoder.asp.
