Smart Technologies SMART 280 Installation And User Manual Download Page 29

Page: 29 / 40

99-00864-20 D0

Using the Document Camera

If the projector or television display shows the on-screen display menu, press the

Menu

button on the document camera control panel to close the menu.

Press the

SD Mode

button on the document camera control panel to switch to SD mode.

The projector or television display shows an image from the SD memory card.

Press the arrow buttons on the document camera control panel to display the next or
previous image until you see the image you want to delete.

Press the

Menu

button on the document camera control panel.

The on-screen display menu appears. For more information on using the on-screen
display menu, see page 9.

Select

Delete

in the on-screen display menu, and then press the right arrow button to

display its submenu.

If you want to delete the current image only, select

Current

, and then press the

Menu

button

to confirm your selection.

If you want to delete all images on the SD memory card, select

All

, and then press the

Menu

button

to confirm your selection.

Select

Yes

, and then press the

Menu

button

to delete the image or images.

Select

, and then press the

Menu

button

to cancel.

If the projector or television display shows the on-screen display menu, press the

Menu

button on the document camera control panel to close the menu.

Press the

SD Mode

button on the document camera control panel to switch to SD mode.

The projector or television display shows an image from the SD memory card.

Press the

Menu

button on the document camera control panel.

The on-screen display menu appears. For more information on using the on-screen
display menu, see page 9.

Select

Start Slide Show

in the on-screen display menu, and then press the right arrow

button to display its submenu.

Select

Start?

, and then press the

Menu

button

to start the slide show.

After you finish the slide show, press the

Menu

button

to stop the

slide show.

If the projector or television display shows the on-screen display menu, press the

Menu

button on the document camera control panel to close the menu.

Press the

SD Mode

button on the document camera control panel to switch to SD mode.

The projector or television display shows an image from the SD memory card.

To delete an image

To display a slide show

To format the SD memory card

Summary of Contents for SMART 280









































Search results

Summary of Contents for SMART 280

Reviews:

Related manuals for SMART 280

Brands by name

Popular brands

Smart Technologies SMART 280, Installation And User Manual

Search results

Summary of Contents for SMART 280

Reviews:

Related manuals for SMART 280

Brands by name

Popular brands