38
RTM-ATCA-736x-10G Installation and Use (6806800P29G)
Hardware Preparation and Installation
Hardware Preparation and Installation
2.6
Installing and Removing SFP/SFP+ Modules
This section describes how to install and remove SFP modules.
The following table
provides the list of SFP/SFP+ modules tested to use with RTM.
Eye Damage
Optical SFP modules may emit laser radiation when no cable is connected. Avoid
staring into open apertures to avoid damage to your eyes.
Personal Injury and Damage of the RTM and SFP Modules
Installing and using SFP modules which are not fully certified and which do not meet
all relevant safety standards may damage the RTM and the SFP modules and may
lead to personal injury. Only use and install SFP modules which are fully certified
and which meet all relevant safety standards.
Personal Injury
Optical SFP modules may be classified as laser products. When installing and using
any of these SFP modules, the regulations which correspond to the respective laser
class apply to the whole RTM. Not complying to these regulations, may lead to
personal injury. When installing and using optical SFP modules which are classified
as laser products, make sure to comply to the respective regulations.
SFP/SFP+ modules can be installed/removed both while the RTM is powered and
non-powered. The presence and also the type of SFP/SFP+ modules is automatically
detected.
The maximum power consumption of all installed SFP/SFP+ modules must not
exceed 12W.
The SFP/SFP+ modules are not included as part of the RTM-ATCA-737x-10G
deliverables. For more information on ordering them, contact your local SMART EC
sales representative
.
Table 2-4
SFP/SFP+ Modules
SMART EC
Part Number
Manufacturer
Part Number
Description
Manufacturer
SFP-CO-RJ-45
DM7041-R-L
1G copper small form-factor pluggable
(SFP) transceiver module - RJ-45
connector
Methode
Electronic Inc
SFPP-SM-LR-LC FTLX1471D3BCL
10G fiber small form-factor pluggable
plus (SFP+) transceiver module -
1310nm, LR, LC connector
Finisar
SFPP-MM-SR-LC FTLX8571D3BCL
10G fiber small form-factor pluggable
plus (SFP+) transceiver module -
850nm, SR, LC connector
Finisar
Summary of Contents for RTM-ATCA-736x-10G Series
