SMART Embedded Computing RTM-ATCA-736x-10G Series, Installation And Use Manual

Page: 9 / 58

RTM-ATCA-736x-10G Installation and Use (6806800P29G) 9
About this Manual
Overview of Contents
This Reference Guide is intended for users qualified in electronics or electrical engineering.
Users must have a working understanding of Peripheral Component Interconnect (PCI),
AdvancedTCA®, and telecommunications.
The manual contains the following chapters and appendices:
Safety Notes on page 15
lists safety notes applicable to the blade.
Sicherheitshinweise on page 19
provides the German translation of the safety notes
section.
Chapter 1, Introduction on page 23
describes the main features of the blade.
Chapter 2, Hardware Preparation and Installation on page 27
outlines the installation
requirements, hardware accessories, switch settings, installation and removal procedures.
Chapter 3, Controls, LEDs, and Connectors on page 43
describes external interfaces of the
blade. This includes connectors and LEDs.
Chapter 4, Sensor Data Records on page 53
provides information on the blade’s FRU info
and sensor data.
Appendix A, Related Documentation on page 55
provides links to further blade-related
documentation.
Abbreviations
This document uses the following abbreviations:
Abbreviation Definition
ANSI American National Standards Institute
ATCA Advanced Telecommunications Computing Architecture
ATN Attention
BMC Baseboard Management Controller
CISPR
Comité Internationale Spécial des Perturbations
Radioelectrotechnique
CMD Command
EMC Electromagnetic Compatibility
EMV Elektromagnetische Vertraeglichkeit