SMART Embedded Computing MVME2502, Installation And User Manual

Page: 27 / 150

MVME2502 Installation and Use (6806800R96L) 27
Chapter 1
Introduction
1.1 Overview
The MVME2502 is a VME form-factor single-board computer based on the NXP® QorIQ®
P2020 dual core processor which features e500 cores delivering an excellent performance-
to-power ratio.The board has wide range of I/O options and is designed for applications
such as industrial control, semiconductor process equipment, radar, sonar and
transportation signaling.
The MVME2502 is designed to work in VMEbus chassis with a 3-row backplane connector
environment with a reduced I/O capacity and reduced peripheral power. It is also designed
to work in a more modern and higher performance VME chassis environment with a 5-row
backplane connector in the 2eVME or the 2eSST protocol mode.
The main features of the MVME2502 board are as follows:

NXP QorIQ P2020 based 6U form-factor VME board
– 1000MHz to 1.2GHz core frequency
– 512KB L2 cache
– Three 10/100/1000 Mbps enhanced three-speed Ethernet controllers
(eTSECs)
– Two PCI-E 1.0a x1 interface controller
– One PCI-E 1.0a x2 interface controller
– USB 2.0 interface
– Enhanced secure digital host controller
– DDR3 memory controller at 800MT/s
– SPI interface (four chip selects, but only two are used on the board)
– Programmable interrupt controller

Dual PMC/XMC sites
– Site1:
PMC supporting PCI-X 64/33 interface
XMC supporting PCI-E 1.0a x2 interface
– Site2:
SATA Drive Kit

2GB DDR3-800 soldered chip memory with ECC

IEEE 1101.10 compliant or SCANBE ejector handles

Extended temperature and rugged variants