Smalvic Fi 95, Installation, Use And Maintenance Instructions, Page: 48 / 68

13
SETTING THE ACOUSTIC SIGNAL TONE
It is possible to select the desired acoustic signal tone from three different levels
Unblock the buttons as described above. Using the SEL button, select the ton option by
pressing the - button and select the preferred tone. Press SEL again or wait 7 seconds until
the setting is automatically fixed.
SETTING THE TIMER
Unblock the commands as previously described, press the central SEL button to select the
TIMER function (the digits 00:00 will appear together with the flashing symbol ). Using the -
and + buttons set the desired programming time. Confirm the function using the SEL button
or wait approximately 7 seconds for automatic activation. The symbol will stop flashing and
the system will start to count in reverse. When the set time expires, the programmer will emit
an acoustic warning signal. To interrupt the signal press any of the programmer buttons.