Smalvic Fi 95, Installation, Use And Maintenance Instructions

Page: 47 / 68

12
ELECTRONIC CLOCK OE (TOUCH)
The electronic clock displays the current time like any normal clock and also activates the
TIMER function to monitor the cooking time, informing you when the set time has expired.
Caution, the timer does not interrupt cooking.
To use the electronic clock follow the instructions below.
After connecting the appliance to the power supply or in the event of a temporary
interruption, the electronic clock will be begin to flash.
SETTING AND ADJUSTING THE TIME
Once the power has been connected, the AUTO symbol will appear on the display and the
digits 00:00 will be flashing. These will remain as such until the time is set.
To set the current time, press the - and + buttons at the same time for approx. 3 seconds, the
centre point and the minutes will start to flash.
Using the - and + buttons individually, set the time.
If the buttons are pressed for more than one second, the display will start to scroll quickly. A
few seconds after the last selection, the system will automatically be fixed on the set time.
The time can be set from 0/24 hrs in h:min (hours:minutes) format.
SAFETY BUTTONS BLOCK
To avoid accidental programming, after approximately 7 seconds from the last use of the
buttons, the system will automatically trigger the command safety block.
To reactivate use of the commands, press the - and + buttons at the same time for at least 2
seconds. Now using the SEL key, it is possible to select the mode you wish to activate.
SETTING AND ADJUSTING THE TIME
Once the power has been connected, the AUTO symbol will appear on the display and the
digits 00:00 will be flashing. These will remain as such until the time is set.
To set the current time, press the - and + buttons at the same time for approx. 3 seconds, the
centre point and the minutes will start to flash.
Using the - and + buttons individually, set the time.
If the buttons are pressed for more than one second, the display will start to scroll quickly. A
few seconds after the last selection, the system will automatically be fixed on the set time.
The time can be set from 0/24 hrs in h:min (hours:minutes) format.
SAFETY BUTTONS BLOCK
To avoid accidental programming, after approximately 7 seconds from the last use of the
buttons, the system will automatically trigger the command safety block.
To reactivate use of the commands, press the - and + buttons at the same time for at least 2
seconds. Now using the SEL key, it is possible to select the mode you wish to activate.