Smalvic FI-64ET, Installation, Use And Maintenance Instructions

Page: 47 / 106

EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
45
Touch control o instructions (model FI-64/74 MTLO)
On/Off
Cooking starts
Programs stop
Temperature adjustment
Increase numerations
Decrease numerations
Core probe
Scroll down
Scroll up
Fast heating
Times adjustment
Light On/Off
Safety lock
This programmer functions with touch system, operate on the
commands by exerting slight pressure in the area indicated
by the symbols.
Oven switch-on/off
To switch the oven on or off, lightly press and hold on the symbol
for approx. one second. .
The actual time will appear on the display. This can be
performed independently from whether the child safety function
is activated or not .
Time adjustment
At the time of the first connection of the current, the flashing
numbers 0:00 appear on the display. The oven cannot be used
without having adjusted the time. To adjust the time, operate on
the and symbols. The time is fixed after approx. 7 seconds
when there is no intervention.
In the event of a temporary power cut, the data memorised
remain set for approx. 45 seconds. To modify the time set, press
the and symbols simultaneously until the numbers start
to flash. If the time is to be read in 12 hour am/pm mode, press
and simultaneously for 5 seconds..
Selecting programs
By pressing the symbols the oven functions menu can be
scrolled.
The current function will flash for a few seconds and the set
temperature assigned to the function will appear (some
functions do not envision adjustment of the temperatures). The
symbol and the flashing PAUSE wording indicate that the
oven is ready to start in the mode selected, but cooking has not
yet begun.
Modification of the temperature assigned to the
function
To modify the temperatures defined for each function, just
touch the symbol and operate on and adjusting the
temperature. After a few seconds, the new value is fixed and
Acoustic signal
To stop the acoustic signal, touch one of the three boxed symbols
SEL . It is possible to adjust the volume of the signal to
three levels, as follows. Operate on the
SEL
symbol until the
letter L appears, followed by the level currently set (from L1 to
L3 ). Touch the symbols to set the desired level
Child safety or accidental contacts
It is a function that can block access to the functionality of the
electronic programmer keys both when the oven is running and
when the oven is off.
When, by operating for approx. 5 seconds on the symbol
this function activates, (the symbol lights up), this prevents
children or other persons from pressing the programmer keys
and modifying the previous program or from starting the oven
that is off. Operate in the same way to deactivate it. In manual
position ( Man ), lactivation of the lock does not allow use of the
oven. Consequently, with the timer function, the lock cannot be
activated.
NOTE: the lock must be deactivated for access to a set program.
This remains active even after a power cut, which
switches the programmer off.