SMA SUNNY TRIPOWER 10.0 Operating Manual Download Page 12 | Manualshive

Page: 12 / 106

background image

2 Safety

SMA Solar Technology AG

Operating manual

STP8-10-3AV-40-BE-en-12

12

WARNING

Risk of injury due to toxic substances, gases and dusts.

In rare cases, damages to electronic components can result in the formation of toxic substances,
gases or dusts inside the product. Touching toxic substances and inhaling toxic gases and dusts
can cause skin irritation, burns or poisoning, trouble breathing and nausea.

• Only perform work on the product (e.g., troubleshooting, repair work) when wearing

personal protective equipment for handling of hazardous substances (e.g., safety gloves,
eye and face protection, respiratory protection).

• Ensure that unauthorized persons have no access to the product.

WARNING

Danger to life due to electric shock from destruction of the measuring device
due to overvoltage

Overvoltage can damage a measuring device and result in voltage being present in the
enclosure of the measuring device. Touching the live enclosure of the measuring device results in
death or lethal injuries due to electric shock.

• Only use measuring devices with a DC input voltage range of 1000 V or higher.

CAUTION

Risk of burns due to hot enclosure parts

Some parts of the enclosure can get hot during operation. Touching hot enclosure parts can
result in burn injuries.

• During operation, do not touch any parts other than the enclosure lid of the inverter.

CAUTION

Risk of injury due to weight of product

Injuries may result if the product is lifted incorrectly or dropped while being transported or
mounted.

• Transport and lift the product carefully. Take the weight of the product into account.
• Wear suitable personal protective equipment for all work on the product.

NOTICE

High costs due to inappropriate Internet tariff

Depending on use, the data volume of the product transferred via the Internet may vary in size.
The data volume depends, for example, on the number of inverters in the system, the frequency
of device updates, the frequency of data transfer to Sunny Portal or the use of FTP push. High
costs for the Internet connection can be the result.

• SMA Solar Technology AG recommends using an Internet flat rate.

«
...
10
11
12
13
14
...
»

Summary of Contents for SUNNY TRIPOWER 10.0











































































































Reviews:

No comments

Related manuals for SUNNY TRIPOWER 10.0

Brand: HANYOUNG NUX Pages: 2

Brand: EAST COAST Pages: 10

LIMETREE USB-DAC

Brand: Lindemann Pages: 24

Brand: T+A Pages: 64

Brand: Rohde & Schwarz Pages: 653

Brand: foxunhd Pages: 5

Brand: DAB Pages: 18

Brand: M-Audio Pages: 8

Brand: HQ Pages: 126

Brand: Power Tech-On Pages: 27

Brand: Tektronix Pages: 2

Brand: Miteq Pages: 55

Brand: JALpower Pages: 36

Brand: JDS Labs Pages: 5

Brand: S&S Pages: 3

Brand: Phenix Pages: 4

Pro Power SB Series

Brand: Sterling Power Pages: 8

Brand: Zapi Pages: 86

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands