SMA America, LLC
Configuring the Sunny Boy
Installation Guide
SB20_25_30HFUS-eng-IUS113711
39
5.5 Disassembling the Quick Module
1. Disconnect the Sunny Boy from voltage sources (see section 8.1 ”Disconnect the Sunny Boy
from Voltage Sources” (page 65)).
2. Open the SMA DC Disconnect (see section 8.2 ”Open SMA DC Disconnect” (page 66)).
3. Pull the Quick Module carefully downwards to the
stopper.
☑ The Quick Module is completely visible.
4. Lay two thumbs on the upper edge of the
Quick Module and carefully push the
Quick Module downwards using your thumbs.
When the Quick Module is at the end of the
bracket, pull the lower edge of the Quick Module
slightly forward.
☑ The Quick Module is loosened from its bracket.
5. Carefully take the Quick Module out of the bracket
to the front.
☑ The Quick Module is disassembled.
