SMA America, LLC
5 Mounting
Installation Manual
SB3-5TLUS22-IA-en-10
33
5.3 Mounting the Inverter and DC Disconnect
2. Hang the inverter in the wall mounting bracket.
3. Ensure that the inverter is securely seated.
4. Remove the lower lid.
5. Carefully push through the enclosure opening above on the DC Disconnect using a screwdriver.
1.
Risk of injury when lifting and from the inverter falling
The inverter is heavy (see Section 11 "Technical Data", page 82). Risk of injury exists through
incorrect lifting and through the inverter falling during transport or when hanging in the wall
mounting bracket.
• Lift and transport the inverter horizontally in the mounting position. Use the recessed grips
on the sides for this.
Lower lid off
