ENGLISH
OPERATING MANUAL FOR
DISPLAY LIGHT
NEAT FLEX / NEAT
Read this short manual carefully and keep it accessible for further
reference!
SAFETY MESSAGES
Disregard of the safety messages may lead to danger of life, burning or
fire!
•
Installation, mounting or works on the electrical connection may only be
carried out by an approved electrician.
•
The product may not be modified or converted.
•
Do not hang or fasten anything on the product, especially no decoration.
•
Do not cover the product - provide free air circulation.
•
There may be hot surfaces on the luminaire. These surfaces are indicated
on the drawing or on the luminaire by the following sign:
•
Always use an existing handle when adjusting the direction of the
luminaire.
•
In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external
switch or by the fuse.
A malfunction exists when:
•
visible damages appear.
•
the product does not work properly (e.g. flickering).
•
smoke, steam or crackling sounds appear.
•
smell of burning is recognisable.
•
an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
•
This product is not intended to be used by children. Ensure that children do
not suffer any harm e.g. by burns from hot surfaces or by electrical shock.
Additional safety messages are indicated by this symbol:
.
USE AS DIRECTED
This product serves exclusively lighting purposes and may:
•
only be used with a voltage of 230V ~50Hz.
•
146422: only be installed according to safety class II (two).
•
170422: only be installed according to safety class I (one).
•
only be operated on normally or not flammable surfaces.
•
only be used indoors.
•
only be used in dry condition,
•
not in damp or dirt-endangered rooms.
•
not in areas of high air humidity.
•
not be exposed to strong mechanical loads or to strong contamination.
PLACEMENT
Operate the product only on an even, stable and tilt-fixed background.
The distance between the light source and the illuminated surface must be
at least
0,5 m
. Pay special caution to easily inflammable objects (e.g. curtains,
fabrics, foliage, etc.).
INSTALLATION
•
Install the luminaire as shown in the figure.
•
Attach the fitting applying the clamp.
•
146422: Clamping range: 17-36 cm
•
170422: Clamping range: 5-49 cm
•
Inserting the light source
•
146422: Remove the cover.
•
Insert the light source with a slight turn to the right.
•
146422: Attach the cover.
OPERATION
Putting into service
Use only parts, which are supplied with the product or are described as
accessories!
Inspect the product for loose parts inside the housing. When there are loose
parts inside the housing and these are not explicitly described the product may
not be installed or operated.
•
Connect the plug of the product with a socket of the public power supply
(mains).
•
146422: Use the switch to turn the product on and off.
MAINTENANCE AND CARE
Light source
Exchange the light source always before it reaches its lifespan, to avoid
personal injuries, or damages of the luminaire or other objects.
Disconnect the product from the power supply, before you exchange the
light source. Let the light source cool down before replacement.
Use only light sources that are suitable for the product. Suitable light
sources are indicated on the type label.
•
Suitable light sources: QPAR51, GU10, 50W max.
•
Replacing the light source
•
146422: Remove the cover.
•
Remove the used light source.
•
Insert the new light source with a slight-turn to the right.
•
146422: Attach the cover.
Care
Disconnect the product from the power supply and let it cool down, before
you clean the product.
•
Clean the product on a regular basis using a slightly moistened, soft and fluff-
free cloth. Please also note additional supplied notes on maintanance and
care.
STORAGE AND DISPOSAL
Storage
•
The product must be stored in a dry and clean environment. Do not
strain the product mechanically during storage.
After a damp or soiling storage the product may only be installed
after checking its condition by an approved electrician.
Disposal (European Union)
•
Do not dispose the product with the regular household waste! Products
marked with this sign must be disposed according to the directive (WEEE,
2012/19) on electrical and electronic devices at local collection points for
such devices!
art.-no. 146422 / 170422 © 14.03.2017 SLV GmbH,
Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0
Technical Details are subject to change.