Slugger Metal Cutter MCSL07, Operator'S Manual

Page: 9 / 16

Remove all contents from packaging and inspect to ensure no damage was incurred during shipping. Your Slugger Metal
Cutter package should also include the following:
ASSEMBLY
DESCRIPTION PART
#
QTY
OPERATOR’S MANUAL LIT113 1
EARPLUGS, 3M-1100 MC702301 1
SAFETY GOGGLES MC702302 1
HEX KEY, M6 058112 1
HEX KEY, M5 0070588 1
GUIDE HANDLE MC731510 1
7” STEEL BLADE (OPTIONAL) MCBL07 1
SAFETY VIDEO MC795103 1
CARRYING CASE MC731514 1
GETTING STARTED
CAUTION!
ALWAYS DISCONNECT THE SAW FROM POWER SOURCE BEFORE MAKING ADJUSTMENTS
.
Refer to the "Functional Description" on page 8 and "Assembly" drawing on page 10. Assemble guide handle (item# 73)
to machine housing. If required, assemble edge guide (item# 74) to base plate (item# 54), and adjust fence gate to
desired position. Secure with thumb screw. If a blade has not been installed, install an authorized saw blade as detailed
in the "Changing Saw Blades" section (page 14).
9
USE ONLY JANCY CERTIFIED BLADES
TO AVOID DAMAGE TO MACHINE!
Do not use machine continuously
for over 30 minutes.
Saw blade diameter · 180mm
Cutting depth · 51mm
#MCBL07
#MCBL07ALM
#MCBLO7SS
(mild steel)
(aluminum)
(stainless Steel)