Slugger Metal Cutter MCSL07, Operator'S Manual

Page: 11 / 16

ITEM DESCRIPTION PART
#
QTY
38 WASHER, FLAT M5 JIS B 1256 MC751142 3
39* POWER CORD, 16-3 SEOOW MC770501 1
POWER CORD, 1.5MM 250V C-EUROPE MC770505
40 SCR, CRPHMS M5 X 12 JIS B 1111 MC751107 1
41 STRAIN RELIEF MC770502 1
42 HANDLE, RIGHT SIDE MC731504 1
43 SCR, HHCS M5 X 16 JIS B 1180 MC751102 4
44 STRAIN RELIEF STRAP MC731515 1
45 SCR, TAPPING CRPH M3.9 X 16 JIS B 1115-AB MC751101 5
46 TRIGGER SWITCH MC772101 1
47* CIRCUIT BREAKER, 8 AMP 125 V MC772102 1
CIRCUIT BREAKER, 4 AMP 250 V MC772103
48 WIRE ASSEMBLY 16 AWG X 350MM RED MC770504 1
49 CAPACITOR, EMC FILTER MC790101 1
50 HANDLE, LEFT SIDE MC731505 1
51 SCR, TAPPING CRPH M3.9 X 22 JIS B 1115-AB MC751105 3
52 CHIP DEFLECTOR MC720113 1
53 SCR, FHSCS M4 X 10 DIN 7991 06771 1
54 BASE PLATE ASSEMBLY MC720121 1
55 CONNECTING ROD MC720201 1
56 BEVEL ANGLE GAGE MC720106 1
57 T-KNOB M8 X 18 STUD JIS B 1180 MC731516 1
58 M6 NYLOCK NUT MC751130 1
59 KNOB, DEPTH ADJUSTMENT MC731517 1
60 WASHER, FLAT M8 JIS B 1256 MC751116 2
61 WASHER, INNER BLADE DRIVE MC741802 1
62 BLADE (NOT INCLUDED) OPTIONAL 1
63 WASHER, OUTER BLADE DRIVE MC741801 1
64 WASHER, FLAT M8 OVERSIZE MC751104 1
65 SCR, SERR FLNG SHCS M8 X 16 MC751103 1
66 BLADE HOUSING MC710002 1
67 SCR, SHCS M6 X 40 JIS B 1176 0070527 2
68 WASHER, FLAT M6 JIS B 1256 MC751118 2
69 CHIP COLLECTOR MC710001 1
70 TRIM COVER MC731502 1
71 SIGHT GLASS MC731503 1
72 T-KNOB M8 X 32 STUD JIS B 1180 MC731501 1
73 GUIDE HANDLE MC731510 1
74 EDGE GUIDE MC720108 1
SAW PARTS LIST
ITEM DESCRIPTION PART
#
QTY
1 MAIN FRAME MC710004 1
2 PLATE, SPINDLE BEARING SUPPORT MC710003 1
3 BEARING, BALL 6202 SHIELDED MC701126 1
4 SPINDLE MC751911 1
5 SPACER 14 X 20 X 6.2 MC720110 1
6 KEY, SPINDLE MC751902 1
7 GEAR, 44T MC751901 1
8 RETAINING RING, EXT M14 MC751113 1
9 BEARING, BALL 608 SHIELDED MC772013 1
10 WASHER, SERR C-SINK M5 JIS 1252-C MC751136 2
11 SCR, CRFHMS M5 X 12 JIS B 1111 0151186 2
12 BUMPER, BLADE GUARD MC731512 1
13 SCR, CRPHMS M6 X 25 JIS B 1111 MC751112 1
14 WASHER, BLADE GUARD SLIP MC720111 1
15 BLADE GUARD MC710005 1
16 WASHER, BLADE GUARD RETAINING MC751903 1
17 SCR, CRPHMS M4 X 12 JIS B 1111 MC751128 3
18 SPRING, BLADE GUARD RETURN MC751406 1
19 MOTOR HOUSING MC731508 1
20 BRUSH HOLDER MC731509 2
21 SCR, SSS M5 X 12 CUP POINT JIS B 1177 MC751123 2
22 MOTOR BRUSH MC772014 2
23 BRUSH CAP MC772015 2
24 WIRE ASSEMBLY 16 AWG X 550MM RED MC770503 1
25* FIELD - 120V MC772002 1
FIELD - 240V MC772004
26 WASHER, EXT SERR M5 JIS B 1252-B 06781 3
27 SCR, TAPPING CRPH M4.8 X 70 JIS B 1115-AB MC751109 2
28* ARMATURE - 120V MC772001 1
ARMATURE - 240V MC772003
29 BEARING, BALL 608 SEALED 04544 1
30 BEARING, BALL 6001 LU 04543 1
31 FAN SHROUD MC731507 1
32 SPINDLE LOCK MC720001 1
33 WIRE GUARD MC731506 1
34 SCR, CRPHMS M4 X 8 JIS B 1111 04820 1
35 WASHER, EXT SERR M4 JIS B 1252-B 06773 1
36 SCR, CRPHMS M5 X 40 JIS B 1111 MC751110 3
37 WASHER, SPRING LOCK M5 JIS B 1251 #2.5 0151534 7
*Different for 120 & 240 volt models.
WHAT YOU SHOULD KNOW BEFORE SAWING
1. Type of material to be cut, (which determines blade selection) thickness and position should all be determined to
ensure proper performance.
2. Remove any excessive mill scale or rust from surface to be cut.
3. Material that has been flame cut may have become heat treated and therefore difficult to cut. Avoid sawing near
such areas whenever possible.
11