5
INSTALL OPTIONAL SWEAT SOLDER ADAPTER (ONLY IF YOUR SUPPLY PIPE DOES
NOT HAVE A MALE THREAD)
B
Remove mud plate from valve and save for later use-
DO NOT
DISCARD
C
Insert threaded adapter into 1 1/2” to 1” threaded adapter (provided).
D
Connect 1 1/2” to 1 “ adapter into top of flushometer (“IN”), Tighten
fittings securely into valve body with a fixed jaw wrench.
NOTE: DO NOT EXERT FORCE ON WALL BOX TO TIGHTEN
FLUSHOMETER. USED FIXED JAW WRENCH TO HOLD THE
VALVE.
For hardwire
use only:
remove wall
box knock/
cap closest
to the conduit
connection.
E
Using a sweat union (not supplied), connect valve assembly to water
supply pipe.
Water Supply
Sweat Union
(not supplied)
Sweat Connections
E
15”-18”
C
D
THREADED
SWEAT ADAPTER
PIPE
A
On a 15”-18” length of pipe (not provided), slide threaded sweat
adapter (not provided) onto water supply pipe until end of pipe rests
against shoulder of adapter. Sweat solder the adapter to pipe
(1" copper x 1" NPT fitting).
