0
007 TURBO INSTRUCTION MANUAL
007 TURBO INSTRUCTION MANUAL
1
2
3
4
5
6
7
KITE SET-UP
INFLATION
STEP 1
Close the OUT valve and secure with
Velcro straps.
STEP 2
Make sure the valve clips for the struts
are open.
STEP 3
Clip the pump leash to the leash loop on
the leading edge (LE) of the kite.
STEP 4
Insert pump nozzle into the IN valve and
secure with a slight twist.
STEP 5
Inflate kite to 8 psi. In constant air tem-
peratures above 85 ° F / 30° C, inflate
only to 6 psi. This is due to air expansion
in higher temperatures
STEP 6
Pull pump nozzle and secure valve with
Velcro straps. No pinching is required.
STEP 7
Clip all valve clips to lock air for each
strut. This will allow your struts to
remain inflated in the event that your LE
loses air.
Summary of Contents for TURBO 2
Page 1: ...2007TURBO2 INSTRUCTION MANUAL...
Page 33: ...33...
