007 TURBO INSTRUCTION MANUAL
1
007 TURBO INSTRUCTION MANUAL
1
2a
2b
3
4
BLAddER MAINTENANCE
(INSTALLATION)
STEP 1
Pull new bladder through strut tail pipe,
with string towards LE end of strut.
STEP 2
Reseat the bladder valve into opening by
pulling valve through until flange sits on
top of the strut.
STEP 3
Reseal the tailpipe by folding and tuck-
ing bladder casing into the strut. Seal
tailpipe with the Velcro closure.
STEP 4
To reseal the strut hose to the nipple, dip
the hose in soapy water and slide back onto
the nipple. Let dry 10 minutes before use.
STEP 5
Inflate strut with 2 PSI making sure the
bladder fills the strut. This may take a
little massaging. This is very important.
Tip: Make sure to rotate all isolation
clips (sharp edges) away from the
canopy side of the kite.
Summary of Contents for TURBO 2
Page 1: ...2007TURBO2 INSTRUCTION MANUAL...
Page 33: ...33...
