007 TURBO INSTRUCTION MANUAL
007 TURBO INSTRUCTION MANUAL
PERFORMANCE
ACTIvE AdJUSTABLE STOPPER BALL USE
Always launch and relaunch your kite with your Active Stopper Ball pushed all the way
out for maximum safety. Once your kite is up then readjust according to your prefer-
ence in the current conditions.
If your Active Stopper Ball is pulled in and you want to push it out and de-power at
the same time, grip the bar next to the chicken loop rope and place your two pointer
fingers around the bar and the Active Stopper Ball. Your fingers will keep the Active
Stopper Ball from pinching the chicken loop rope and allow you to move the stopper
up freely while sheeting out.
In light wind, pull in your Active Stopper Ball close to the bar until your kite is trimmed
for the current conditions to reduce bar pressure.
dE-POWER AdJUSTMENT BELOW ThE BAR
The TURBO 2 de-power cleat and handle is located within reach of every rider. We have
designed the chicken loop system and brought our adjustment cleat and handle below
the bar and mounted it onto the chicken loop.
From this new location, you can easily adjust the throw depending on the conditions
you are riding. In a situation when you are overpowered in stronger wind , or if the
kite is stalling in lighter wind, you may need to pull in your de-power handle accord-
ingly. Pulling in your de-power handle also brings the bar pressure closer to you.
Summary of Contents for TURBO 2
Page 1: ...2007TURBO2 INSTRUCTION MANUAL...
Page 33: ...33...
