background image

 

1.3

 

Place a tray under the water plug or place the unit in a drainage area.   

1.4

 

Screw off the drain plug and unplug the water rubber stopper - water will drain from the 
container.   

1.5

 

Put the water rubber stopper back and screw the drain plug cap back into place. 

 
 
 

2.

 

Continuous drainage:   

2.1

 

Screw off the drain plug cap and unplug the water rubber stopper.   

2.2

 

Use a water pipe to connect to the water outlet. 

2.3

 

You can plumb this pipe into your current plumbing system,   
lead it outside and use gravity fall or use a water pump. 

 

 

Note: 

This model has a self-evaporative function, which reduces the need to empty the water tank.    If the unit 

is vented correctly most of the water is reused to cool the condenser coils and any excess is evaporated. Please 
do not use continuous drainage if you intend to use the self-evaporating facility.

 

Maintenance 

Cleaning 

Please shut off the unit and unplug from the mains before cleaning or performing any maintenance 

 

Clean the surface   

Clean the surface of machine with a wet soft cloth. Don't use chemicals, such as benzene, alcohol, gasoline, 
etc.; otherwise, the surface of the air conditioning will be damaged or even the whole machine will be 
damaged. 
 

Air filter cleaning 

If the filter screen is clogged with dust, the effectiveness of the air conditioning is reduced. Please schedule 
clean the filter screen once every two weeks or as often as necessarily in your environment.   

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

A: Clean the upper filter screen frame 

a: Grip the edge of the evaporator filter screen frame with both hands. Pull out to remove the filter screen 

from its frame. If present, unscrew the screws fixing the filter before removing it (as shown in the above 
figure) .                                                   

Summary of Contents for CLIM9000CE













Reviews: