SlimLine Force Sensor, Type 9173B to 9177B
Page 16
9173B_002-286e-07.10
4.4.2
Cable Routing
Caution!
Do not allow any grease to get onto the surfaces of the
sensor. The head bearing surface and thread of the
preloading bolt must be greased before the bolt is
screwed in.
The sensor cable must be secured and provided with strain
relief so it cannot kink or twist. The
bending radius must
not be lower than 3 mm
.
The cable connection can be secured with devices such as
pins, which also serve to position the sensor.
Fig. 9: Cable Routing
Summary of Contents for 9173B
Page 1: ...Instruction Manual SlimLine Force Sensor Type 9173B to 9177B 9173B_002 286e 07 10...
Page 2: ...Instruction Manual SlimLine Force Sensor Type 9173B to 9177B 9173B_002 286e 07 10...
Page 27: ...Calibration and Maintenance 9173B_002 286e 07 10 Page 25 Fig 12 In situ calibration procedure...
