14
5926
19
2021
-
SXP35 & SXP50
MG_0211
BAT. -
5, 6 Nm
Control Box
hose clamp
Hose claps
BAT. +
5, 6 Nm
MOTOR CABLE -
5Nm
# SX
*P
35 CONTROL BOX
TORQUE 8Nm
MOTOR CABLE +
5Nm
BAT. -
5, 6 Nm
BAT. +
5, 6 Nm
MOTOR CABLE -
5Nm
# SX
*P
50 CONTROL BOX
TORQUE 8Nm
MOTOR CABLE +
5Nm
*P- Propositional
*P- Propositional
Propeller Installation
1. Centre the drive pin and Insert the propeller onto the shaft spine. Rotate the propeller until the drive pin aligns with the internal slot in the
propeller.
2. Insert the washer to the end of the shaft spline. Tighten with the propeller lock-nut.
3. Apply anti fouling to the gear leg and propeller. Do not apply anti fouling to any rubber elements of the gear leg or anodes.
MC_0016
!
Please refer to the graphic for special considerations relating to your model
!
MG_0054
Anti-fouling
Lock nut
Washer
Propeller
Drive pin