5
2653
11
2021
-
SE IP 100 & SE IP 130
MC_0057
Technical Specifi cations
Motor:
Custom made reversible DC-motor.
Gear house:
Seawater resistant bronze. Ball-bearing at propeller shaft and a combination of ball bearing and slide bearing at drive shaft.
(Pre-fi lled and sealed for life)
Motor bracket:
Glass fi bre reinforced composite material. Brass thread inserts.
Ignition
Protection:
Conforms to ISO 8846
Tunnel:
Cross spun with rowing G.R.P tunnel
Steel & aluminium tunnels available at request.
Propeller:
5-blade skewback “Q-prop” propeller, fi breglass reinforced composite.
Batteries:
Minimum recommended battery capacity (cold crank capacity by DIN/SAE standard)
Contact a battery supplier for more information.
Max. Use:
2 - 3 min. duty cycle at 20º
Safety features:
- Electronic time-lapse device protects against sudden change of drive direction.
- The electric thermal cut-off switch in electro motor protects against overheating (auto-reset when electro motor cools down).
- Flexible coupling between electro-motor and drive shaft protects electro motor and gear system if propeller jams.
- Original Sleipner panels shut off automatically 6 minutes after last use.
- Original Sleipner panels use child-safe double ON buttons.
- An integrated microprocessor monitors solenoids, reduce wear and risk of solenoid lock-in.
- Auto-stop of the thruster occurs when an undesirable solenoid lock-in occurs or when continuous operation cut-off timer
exceeds 3 minutes.
MC_0132
Thruster Measurements
Measurement
code
Measurement description
mm inch mm inch mm inch mm inch
ID
Internal tunnel diameter
185
7,28
185
7,28
250
9,84
250
9,84
H
Motor Height
499
19,65
510
20,08
511
20,12
511
20,12
W
Width
306
12,05
306
12,05
306
12,05
306
12,05
L
Length
381
15,00
381
15,00
381
15,00
381
15,00
WD
Water Depth
185
7,28
185
7,28
250
9,84
250
9,84
TL
Minimum tunnel length
158
6,22
158
6,22
253
9,96
253
9,96
TL (recommended)
Recommended tunnel length
195
7,68
216
8,50
303
11,93
303
11,93
T (min)
Minimum tunnel wall thickness
6
0,24
6
0,24
6
0,24
6
0,24
T (max)
Maximum tunnel wall thickness
8
0,31
8
0,31
8
0,31
8
0,31
* IP 100
12v
* IP 100
24v
* IP 130
12v
* IP 130
24v
*Valid for SE IP & SEP IP
MC_0138
Thruster Specifi cations
Description
* 80
* 100
* 120
* 130
* 150
Available DC System (v)
12v & 24v
12v & 24v
24v
12v & 24v
24v
Thrust 12v or 24v (kg * lbs)
96 kg * 212 lbs
116 kg * 256 lbs
139 kg * 306 lbs
160 kg * 352 lbs
182 kg * 400 lbs
Thrust 10.5v or 21v (kg * lbs)
80 kg * 176 lbs
100 kg * 220 lbs
120 kg * 264 lbs
130 kg * 284 lbs
150 kg * 330 lbs
Typical Boat Size (m * ft)
10m - 15m * 35ft - 48ft
12m - 17m * 35ft - 15ft
13m - 18m * 42ft - 60ft
13m - 19m * 42ft - 62ft
14m - 20m * 44ft - 64ft
Propulsion System
Twin
Twin
Twin
Twin
Twin
Power (kw * Hp)
4.4kw * 6hp
6.3kw * 8.4hp
6.4kw * 8.55hp
6.5kw * 8.7hp
8.8kw * 11.8hp
Weight (kg * lbs)
20kg * 44lbs
31kg * 68lbs
34kg * 74lbs
37kg * 77lbs
38kg * 79lbs
*Valid for SE / SE IP & SEP / SEP IP
MG_0076
H
W
L
TL
WD
ID
T
Tunnel centre line
Twin Propeller
Propeller position will
vary with each thruster
model
The gear leg/ propeller(s) must
never extend out of the tunnel
