Sleipner PJC421, User Manual, Page: 37 / 52

37
6770 2 2021
-
PJC421 & PJC422
MG_0458
W
H
(a)
(b)
* PJC422-LF90X
Measurement
code
Measurement description
mm inch mm inch
H Panel Height 96 3.8 96 3.8
W Panel width 96 3.8 96 3.8
(a) Raised height above the dashboard 112.5 4.4 112.5 4.4
(b) Depth behind the dashboard (not inc. cables) 85 3.3 85 3.3
PJC421
LF90X/-DNV
PJC422
LF90X/-DNV
MC_0391
PJC421-LF90X and PJC422-LF90X Measurements
Description Value
Available interfaces X1 Joystick
-1x +12V/+5V to joystick
-1x AGND
-2x analog inputs
-2x digital input
-1x +5V to LED
-1x LIN data
8 pin male connector
X2 S-Link
-Vin
-GND
-CANH
-CANL
5 pin S-Link male connector
X3 IO
-2x digital output
-2x digital IO
-2x GND
-1x DO_ISO_IN
-1x DO_ISO_OUT
-1x Vin Ext
-1x GND Ext
10 pin male connector
Digital out signals on DO_0, DO_1, DIO_0
and DIO_1 are only available when TP-35
is powered through the S-Link interface.
Output voltage on I/O pins Same as supply voltage
Max total output current on
I/O pins
100mA
Max output current on one
I/O pin
100mA
Max current thru isolated
digital output
45mA
Max current on +12V to
joystick
40mA Intended for joystick potentiometers
Max current on +5V to
joystick
40mA Intended for joystick potentiometers
Max current on +5V to
joystick LED
80mA Intended for joystick backlight
IO protection +31VDC and 0VDC All accessible IOs tolerate connection to
GND and the same voltage as the used
supply voltage, M31V.
Voltage level digital input High = >4.5 VDC
Low = <0.5 VDC
Detailed IO Description
MC_0394
MG_0481
(Pin#). (Wire color) - (Signal name)
2. Brown - DO_0
3. Orange - GND
4. Yellow - DO_ISO_IN
5. Black - GND_EXT
6. Green - DIO_1
7. Black/White - GND
8. Light Blue - DIO_0
9. Purple - DO_1
10. Grey - DO_ISO_OUT
1. Red - +V_EXT
Auxiliary power supply for compliance with DNVGL-RU-SHIP Pt.4 Ch.9. 2.1
Primary power supply is S-Link
Optional buzzer connection
Max current consumption of buzzer: 100mA
Output voltage is equal to S-Link voltage
Order number buzzer: SM909828
Order number IO cable: SM908998
+9-31VDC
GND
Buzzer -
Optional isolated relay connection
Max current thru relay: 45mA
Relay A
Relay B