Sleipner PJC421, User Manual, Page: 15 / 52

15
6770 2 2021
-
PJC421 & PJC422
Follow the on-screen instructions to calibrate the joystick. It is important to keep the joystick in the specifi ed position while pressing . Below is an
example of the steps for calibrating a dual joystick.
Control Panel - Menu Navigation
MC_0407
Abort joystick calibration and return to Joystick Setting menu.
Confi rm current calibration step.
Control Panel - Menu Navigation
MC_0407
Station Control Settings
The Station Control Settings menu is only available on control panels with part numbers that end with -DNV . See detailed description in the
Functionality of DNV models chapter.
Functionality of DNV models
All PJC4xx part numbers that end with -DNV has additional functionality for compliance with DNV-RU-SHIP-Pt4Ch9 - Control and monitoring systems.
The following features are available with part numbers that end with -DNV :
• Power supply failure alarm display of motor RPM
• Gear leg low oil level alarm
• Select station
For compliance with DNV-RU-SHIP-Pt4Ch9 independent emergency stop must be installed.
Enables or disables the Select station functionality.
• Activated
• Deactivated
Defi nes the type of workstation.
• Main
• Remote
Defi nes the location of the control panel. Only used in systems with Voyage Data Recorder Interface, VDRI-1.
• Bridge
• Port Wing
• Starboard Wing
• Engine Control Room
• Engine
• Wing
Station Control
Workstation
Location
Power supply failure alarm
An auxiliary power supply input is available on the X3 I/O connector. When powering TP-35 from both the S-Link interface and the I/O connector, an
alarm will be triggered if one of the power supplies falls outside the rated input voltage range. See Detailed IO Description chapter for information on
auxiliary power supply connection.
A failure on the S-Link power supply will suspend thruster operation from the control panel. If the auxiliary power supply falls outside rated voltage
ratings, an alarm will be triggered, but thruster operation will be allowed.